HALAR PTFE 6014 & 6614

Halar Ectfe ( Ethylene Chlorotrifluoroethylene)

Halar Ectfe Is A Melt Processable Fluropolymer From Solvay Solexis .It Possesses A Unique
Combination Of Properties As A Result Of Its Chemical Structure - A 1:1 Alternating Copolymer Of Ethylene And Chlorotrifluoroethylene.

Properties :-

1. Semicrystalline And Thermoprocessable Fluoropolymer
2. Melting Point :- 220 ° C  245 ° C
3. Best Combination Of Low Permeability And Good Chemical Resistance ( Ph 1 / 14)
4. Temperature Resistance From Cryogenic Up To 150 °C
5. Very Smooth Surface
6. Density 1.68 G / Cm ^3

Chemical Resistance :-

• Halar Is One Of The Most Chemically Resistant Polymers Available Today
• Can Handle The Full Ph 1/ 14 Range
• Easily Handles Powder Bleaching Agents, Such As Sodium Hypochlorite
• Is Not Dissolved By Any Known Solvent To 150 ° C
• Is Hydrophobic ( No Influence Of Water And Moisture
• Is Ozone Resistant
• Has Excellent Resistance To High Energy Radiation

Surface Properties :-

• Halar Has Exceptional Surface Smoothness Which Precludes The Shedding Of Particles And Avoids Particle Trapping
• The Formation Of Bioorganic Films And Bacterial / Fungal Colonies Is Significantly Reduced With Respect To Stainless Steel And Electropolished Stainless Steel And Other Polymers

Purity

1. Static Soak Testing In Ultra Pure Water And High Purity Chemicals Show Extremely Low Levels Of Metallic And Organic Extractables. Virtually No Contaminants Detected
2. Additional Dynamic Rinse Data Validates Halar As Suitable For High Purity Systems In The Semiconductor, Biotech And Pharmaceutical Industries. Whatever Surface Contaminants Which May Initially Exist ,Quickly Rinse Away
3. Halar Exhibits Very Low Fluoride Ion Leachout
4. Halar Coating Does Not Contribute To Ion Contamination , Prevents Rouging And Protects The Quality Of The Products Being Produced

Adhesion To Substrate

• Halar Coatings Are Able To Provide Excellent Adhesion To Many Different Substrates. The Most Common Substrate For Halar Coating Is Stainless Or Carbon Steel, Aluminum
•  Unique Polarity Of The Halar Unit Provides Good Interaction With The Very Polar Metallic Oxide On The Surface Of Metal Substrates
• Halar Is The Fluoropolymer With The Lowest Coefficient Of Linear Thermal Expansion.
• Pressure And Vacuum Resistance

Grades Of Halar

1. Halar 6614 Primer And Halar 6014 Top
2. Colour Of Coating :- Dark Green
3. Shore Hardness ( Astm D 2240 ) - D75
4. Maximum Coating Thickness :- 0.8 Mm To 1 Mm